Processed toughened or tempered glass is glass that has been processed by controlled thermal or chemical treatments to increase its strength compared with normal glass. Tempered glass is made by processes which create internal stresses which give the glass strength.Moreover, it is the only glass strong enough to withstand high levels of thermal stress, a common reason for breakage in building facade glazing units.These safety Featuress also make it an exemplary choice for automotive applications.Guaranteeing quality, Rider applies heat soak testing to all of its tempered glass before packaging and loading. It is available in all of Rider’s standard float thicknesses and sizes.

Rider can produce the flat of curved tempered glass.The size can be customized and the different tempered logos can be printed on the glass according to customers' requirements.All work done on glass (beveling, cutting, bending, etc) must be done before tempering.Ideal for areas with high wind loads and areas where human contacts is an important consideration, Rider’s tempered glass is the perfect option for architects who must meeting building codes and safety requirements. 

SPECIFICATIONS of Toughened Tempered glass

Clear float toughened glass, reflective toughened glass, tinted toughened glass, low-E toughened glass, toughened pattern glass, silk screen printed toughened glass, etc.

GLASS PANEL 

Ultra Clear Float Glass
Ultra Clear Textured Patterned Glass

Color of Toughened Glass:Clear, Ultra Clear, Bronze, Golden, Grey, Green, Blue and Pink etc.       

Note:Rider toughened glass can be customized according to the given specifications and colors from clients.

GLASS DESCRIPTION

Ultra clear tempered glass is produced by heating annealed glass in a furnace to 620℃. Progressing from the furnace, the glass is rapidly cooled with jets of cold air, inducing compressive stresses to the surface while the center remains tensile.
4-5 times stronger than annealed glass of the same thickness.
Stronger resistance to thermal breakage than annealed or heat strengthened glass
If breakage occurs the glass breaks up into small, cubical fragments, which are not threatening to humans.
All work done on glass (beveling, cutting, bending, etc) must be done before tempering.
Ideal for areas with high wind loads and areas where human contacts is an important consideration, Rider’s tempered glass is the perfect option for architects who must meeting building codes and safety requirements. 
Moreover, it is the only glass strong enough to withstand high levels of thermal stress, a common reason for breakage in building facade glazing units.These safety Featuress also make it an exemplary choice for automotive applications. Guaranteeing quality, Rider applies heat soak testing to all of its tempered glass before packaging and loading. It is available in all of Rider’s standard float thicknesses and sizes.

FEATURES

Solar Direct Transmission: ≥91.6%
Light Transmittance: ≥92.4%
Iron Content (Fe2O3): ≤120ppm 
Heat Conductivity (20℃): 1.06w/m•K.
Overall Bow: ≤0.2%.
Density: 2.5g/cm3
Young’s Modulus: 73GPa
Tensile Strength: 42MPa
Thermal Expansion Coefficient: 9.03*10-6
Softening Point: 720℃
Annealing Point: 570℃
Strain Pont: 500℃.

APPLICATIONS

Solar Glass.
External use of show windows, doors, shopfronts in offices, houses, shops etc.
Interior glass screens, partitions, balustrades etc.
Shop display windows, showcases, display shelves etc.
Furniture, table-tops, picture frames etc.

QUALITY CERTIFICATION 

AS/NZS 2208:1996; EN 12150-2:2004